Now you just have to make a call.
The question is how do you charge your phone battery.
You’ve got a 12V battery in your car but the cell battery is only 3V.
If you have a pencil and some wire your in luck.
Watch the video to see how it’s done.
https://www.youtube.com/watch?v=sEncZHchsA4
If you’ve made any mortise and tenon joints you know that they are time consuming. There also is a risk of a misscut along the way requiring a new piece to be made.
With the domino system every member is cut with a simple but joint and then the domino mortises are made. The alignment stops built into the tool make it dead simple to get perfect alignments every time.
This video review will sow you all the details.
https://www.youtube.com/watch?v=xCyyy5Jtf3E
You know that hot glue gun you’ve got tucked away in the corner cupboard?
You’re going to want to dust it off after watching this video.
One of the places I’ve used hot glue is in the install of plastic laminate back splashes. Put your carpenters glue on the splash, then some dabs of hot glue and hold it in place till the hot glue sets. No need to rig up some kind of pressure clamps.
It can also be used when paneling a wall, when you have a fussy customer who doesn’t want to see any puttied nail holes.
Watch the video – Jimmy has more great tips for you.
https://www.youtube.com/watch?v=9kyLY1xWrCI
This is the first time I’ve seen a table like this.
It makes a lot of sense if you have a small shop and have a number of machines to access.
The castors allowing it to be put off to the side out of the way frees up the center of the floor for assembling larger projects.
Here’s a image of the flip tops during construction.
A full set of all 12 steps in the construction can be found at the original article
It’s also one of the safest machines in your shop.
Today’s video is a great video on using the bandsaw. if this video does not become an all time classic I will be surprised.
This veteran bandsaw user is going to cover the basics and then take it to a level you probably didn’t know existed.
Watch the video.
https://www.youtube.com/watch?v=gA4lpsEWM5k
If it’s like mine your hole are always off 90º .
Well there is a simple trick you can use to solve that problem.
You can even drill square holes into round pipe if you add a V base to this simple jig.
Watch this video and discover this quick tip.
https://www.youtube.com/watch?v=vZ58uj6RwSQ
Dressing or breaking down rough lumber is an important step to getting usable pieces of lumber to work with.
It’s a process that gives you straight true reference edges to use for further milling.
Without that straight true edge you will run into safety issues when for example you try to rip the piece on a table saw.
Watch this video for futher insights.
https://www.youtube.com/watch?v=7vZz-TVPUIo
